Technicolor TG213 User Manual

Home Network
Power Wall Plug Repeater 30
Properties
Description
5g Security
Authentication Type
To protect your device from unauthorized access, select and
configure the authentication type that connecting devices
must use to connect to the 2.4Ghz band.
•
Disable
: Select if you will not require authentication to
connect to your device.
•
WEP
: Select if you wish to use the WEP security for
authentication. Select
WEP
,
Mode
, and
WEP Key
, and
then type the
Key
on the allotted box. Connecting
devices must enter the correct WEP key to establish
connection.
•
WPA/WPA
-
2Personal
: Select if you wish to use the
WPA/WPA-2 security for authentication. Then, type the
Passphrase
on the allotted boxes. Connecting devices
must enter the correct WPA/WPA-2 passphrase to
establish connection.
After modifying any of the above properties, click Apply to save and apply changes.
Wi-Fi Protected Setup
The Wi-Fi Protected Setup page allows you to enable/disable the WPS function of
your device and allow wireless clients to connect to your device using the Push
Button (PBC).
Properties
Description
WPS Configuration
Wi-Fi Protected Setup (WPS) allows wireless clients to
connect to your device by pressing the WPS button on your

Technicolor TG213 Specifications

General

Brand	Technicolor
Model	TG213
Category	Repeater
Language	English