Technicolor TG582n User Manual

14
2 GUIDED INSTALL
ATION
DMS-CTC-20101206-0009 v1.0
6 Click Finish.
7 The CD menu appears.
CD Menu
On the CD Menu, you can click:
 Initial Setup to connect your computer to the Technicolor Gateway and configure your local network.
 Reconfigure my Technicolor Gateway to fully reconfigure your Technicolor Gateway.
 Setup my computer to connect your computer to the Technicolor Gateway network.
 Documentation to view a list of the documentation that is available for your Technicolor Gateway.
 Visit technicolor.com to visit the online support sections.
In case of problems
If you encounter problems during this installation please refer to “10.1 Setup Troubleshooting” on page 80.
Backup your configuration
Once you successfully installed your Technicolor Gateway, it is recommend to backup your configuration. This will allows
you to return to this configuration when needed (for example, after misconfiguration).
For more information, see “4.2 Backing Up/Restoring your Configuration” on page 33
If you reconfigure your Technicolor Gateway via the CD menu, the Technicolor Gateway will be reconfigured
from scratch. All your current settings will be lost. If you only want to make small changes to your configuration
(for example, changing the security), we recommended you to do this via the Technicolor Gateway GUI. For more
information, see “4.1 Technicolor Gateway GUI” on page 28.
Actual available items depend on the Setup CD delivered with your Technicolor Gateway.

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+