Technicolor TG582n User Manual

73
9 INTERNET SECURITY
DMS-CTC-20101206-0009 v1.0
Option 1: content-based filter (combined with the address-based filter)
If you want to use the content-based filtering:
1 Browse to the Technicolor Gateway GUI.
2 On the Toolbox menu, click Parental Control.
3 On the Navigation bar, click Configure.
4 Make sure that the Use Content-Based Filter check box is selected.
5 Configure the content-based filter. For more information, see “9.1.1 Configuring Content-based Filtering” on page 74.
6 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter. For more
information, see “9.1.2 Adding Rules for Address-Based Filtering” on page 75.
Option 2: address-based filter only
Take this option if content filtering is not available on your Technicolor Gateway or you don’t want to use it.
To configure address-based filtering:
1 Browse to the Technicolor Gateway GUI.
2 On the Toolbox menu, click Parental Control.
3 On the Navigation bar, click Configure.
4 Make sure that the Use Address-Based Filter check box is selected.
5 In the Action for Unknown Sites, select:
 Allow as the default rule if you want to allow access to all web sites and manually specify which web sites may not be
accessed.
 Block as the default rule if you want to deny access to all web sites and manually specify a number of web sites that
may be accessed.
6 Click Apply.
7 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see “9.1.2 Adding Rules for Address-Based Filtering” on page 75.

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+