16
2 GUIDED INSTALL
ATION
DMS-CTC-20101206-0017 v1.0
6 Click Finish.
7 The CD menu appears.
CD Menu
On the CD Menu, you can click:
Initial Setup to connect your computer to the Technicolor Gateway and configure your local network.
Reconfigure my Technicolor Gateway to fully reconfigure your Technicolor Gateway.
Setup my computer to connect your computer to the Technicolor Gateway network.
Documentation to view a list of the documentation that is available for your Technicolor Gateway.
Visit technicolor.com to visit the online support sections.
In case of problems
If you encounter problems during this installation please refer to “10.1 Setup Troubleshooting” on page 84.
Backup your configuration
Once you successfully installed your Technicolor Gateway, it is recommend to backup your configuration. This will allows
you to return to this configuration when needed (for example, after misconfiguration).
For more information, see “4.2 Backing Up/Restoring your Configuration” on page 37
If you reconfigure your Technicolor Gateway via the CD menu, the Technicolor Gateway will be reconfigured
from scratch. All your current settings will be lost. If you only want to make small changes to your configuration
(for example, changing the security), we recommended you to do this via the Technicolor Gateway GUI. For more
information, see “4.1 Technicolor Gateway GUI” on page 32.
Actual available items depend on the Setup CD delivered with your Technicolor Gateway.
To Next Page
Loading...
Need help?
General
