18
2 GUIDED INSTALL
ATION
DMS-CTC-20110713-0016 v2.0
5 At the end of the installation, the following screen appears:
Select Go to the MediaAccess Gateway web interface if you want to go to the MediaAccess Gateway GUI after closing
the wizard. On the MediaAccess Gateway GUI, you can configure all services of your MediaAccess Gateway.
6 Click Finish.
7 The CD menu appears.
CD Menu
On the CD Menu, you can click:
Initial Setup to connect your computer to the MediaAccess Gateway and configure your local network.
Reconfigure my MediaAccess Gateway to fully reconfigure your MediaAccess Gateway.
Setup my computer to connect your computer to the MediaAccess Gateway network.
Documentation to view a list of the documentation that is available for your MediaAccess Gateway.
Visit technicolor.com to visit the online support sections.
If you reconfigure your MediaAccess Gateway via the CD menu, the MediaAccess Gateway will be reconfigured
from scratch. All your current settings will be lost. If you only want to make small changes to your configuration
(for example, changing the security), we recommended you to do this via the MediaAccess Gateway GUI. For
more information, see “4.1 MediaAccess Gateway GUI” on page 36.
Actual available items depend on the Setup CD delivered with your MediaAccess Gateway.
To Next Page
Loading...
Need help?
General
