Need help?Do you have a question about the Technicolor tg799 and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| VoIP | Yes |
| Wi-Fi Standards | 802.11b/g/n |
| Ethernet Ports | 4 |
| Wireless Frequency | 2.4 GHz |
| DSL Standards | VDSL2, ADSL2+ |
| Security Features | WPA, WPA2, Firewall |
| DSL | VDSL2, ADSL2+ |
Explains the two primary usage scenarios for the MediaAccess Gateway: DSL Gateway and Local Router, detailing connection setups.
Details the power inlet for connecting the power supply and the power switch for turning the device on/off.
Explains the Wireless Access Point and Ethernet switch functionality, including LED status for Ethernet ports.
Describes the DSL port for connecting to the service provider's network and the WAN port for using the gateway as a Local Router.
Explains DECT base station and phone port for VoIP calls, and the optional PSTN port for traditional network backup.
Guides users on configuring the MediaAccess Gateway via its Graphical User Interface (GUI) if not preconfigured.
Details how to secure access to the MediaAccess Gateway by changing the default username and password.
Guides on backing up and restoring the MediaAccess Gateway's configuration settings.
Provides guidance on securing the wireless connection using WPA-PSK or WPA2-PSK encryption types.
Details how to configure VoIP service, including proxy, registrar, and account settings, for Internet telephony.
Allows denial of access to specific websites, supporting address-based and content-based filtering.
Guides on configuring content-based filtering, including default actions and creating custom content levels.
Details how to add rules for address-based filtering, including denying, allowing, or redirecting specific websites.
Explains the integrated firewall, predefined security levels, and how to change or create security levels.
Provides solutions for issues encountered during installation, such as the Setup CD not starting or the gateway not being found.
Addresses common issues like no LEDs lighting up, broadband/internet LEDs not working, or the gateway being unreachable.
Helps resolve issues with wired connections, specifically when the Ethernet LED does not light up.
Covers troubleshooting for no wireless connectivity, poor signal strength, and connection issues via WPS.
Provides solutions for problems with making or receiving phone calls via VoIP or the traditional telephone network.
Assists with troubleshooting content sharing issues, focusing on obtaining the IP address of USB storage devices.
Explains how to reset the MediaAccess Gateway to factory default settings via the GUI or the reset button.
To Next Page
