EasyManuals Logo
Home>Technics>Headphone>EAH-AZ70W

Technics EAH-AZ70W User Manual

Technics EAH-AZ70W
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Preparation
16
Connecting a Bluetooth
®
device
1
Take both earphones (L and R) out of the charging cradle.
When pairing with a device for the first time:
This unit will start to search for a Bluetooth
®
device to connect to, and the earphone LEDs will light alternately
in blue and red.
When pairing with a device after the first time:
Taking the earphones out of the charging cradle will light the earphone LEDs (blue). While the earphone LEDs
light (blue) (about 3 seconds), if you touch and hold the touch sensor (L or R) for about 7 seconds, the
earphone LEDs will light alternately in blue and red.
2
Turn on the Bluetooth
®
device and enable the Bluetooth
®
function.
3
From the Bluetooth
®
menu of the Bluetooth
®
device,
select device name “EAH-AZ70W”.
A BD address (Bluetooth
®
Device address: an alphanumeric character
string that is displayed by and unique to the device) may be displayed
before “EAH-AZ70W” is displayed.
If prompted for a passkey, input the passkey “0000 (four zeros)” of this
unit.
When the earphone LEDs blink (blue)* twice at approximately 5 second
intervals, pairing has been completed and connection has been
established.
* The batteries are low when they are blinking in red.
4
Confirm that the earphones and the Bluetooth
®
device are connected.
Note
If the connection with the device does not complete within 5 minutes, the pairing mode on the earphones cancels and
they transition to connection standby mode. Perform pairing again.
You can pair a maximum of 10 Bluetooth
®
devices with the earphones. When you pair a device after the maximum
has been exceeded, previous devices are overwritten. To use overwritten devices again, do the pairing again.
Preparation
Put the earphones into the charging cradle.
Place the Bluetooth
®
device within approx. 1 m (3.3 ft) from the unit.
Check the device operation using its operation instructions as required.
Using the “Technics Audio Connect” app (free of charge) makes connecting with Bluetooth
®
simple. (l 15)
Connecting by pairing (registering) your earphones with a Bluetooth
®
device
Bluetooth
Bluetooth ON
EAH-AZ70W
Device
e.g.
Select

Other manuals for Technics EAH-AZ70W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technics EAH-AZ70W and is the answer not in the manual?

Technics EAH-AZ70W Specifications

General IconGeneral
Cable length0.5 m
Control typeTouch
Headset typeBinaural
Product typeHeadset
Product colorSilver
Wearing styleIn-ear
Recommended usageCalls/Music
Works with the Google AssistantYes
International Protection (IP) codeIPX4
Battery typeBuilt-in battery
Battery recharge time2 h
Continuous audio playback time6.5, 7.5 h
Battery recharge time (charging case)2.5 h
Continuous audio playback time (with charging case)19.5 h
Wireless range10 m
3.5 mm connectorNo
USB connectivity-
Bluetooth version5.0
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Connectivity technologyWireless
Impedance- Ω
Driver unit10 mm
Magnet typeNeodymium
Ear couplingIntraaural
Headphone frequency20 - 20000 Hz
Cables includedUSB
Charging case typeWired
Charging case connector typeUSB Type-C
Microphone typeBuilt-in
Weight and Dimensions IconWeight and Dimensions
Charging case weight65 g
Left earpiece weight7 g

Related product manuals