Technics RS-CH7 - Page 6

RS-CH7 |
ai
|
Removal
of
the
Operation
P.C.B.
Procedure
1-246
0
Q
3
5
6)
|
|
9
Rear
panel
|
1. Remove 6 screws (@~@).
2. Remove 2 claws.
3. Remove the rear panel in the direction of arrow.
Operation P.C.B.
4. Remove the operation P.C.B. in the direction of arrow.
Spring
(DECK 1)
1. Push the eject rod in the direction of arrow and then open
the cassette holder.
2. Remove the spring (DECK 1, DECK 2).
3. Press 4 claws and then remove the eject rod.
Ref. No. Removal of the Eject rod Ref. No. Removal of the Eject Lever (A)
8 (DECK 1 and DECK 2) 9 and Eject Lever (B)
Procedure Procedure
1-2—-4—5— 152—-4—5—
6—8
Eject rod (DECK 2) Elect ioc (PEC I)
@ Eject lever B
e@Removal of the Eject Angle (A)
1. Remove the screw (@).
2. Pull out the eject angle (A).
Removal of the Eject Angle (B)
1. Remove the screw (Q).
2. Pull out the eject angle (B).
Ref. No. Removal of the Cassette Holder
10 (DECK 1 and DECK 2)
1 recone Cassette holder
6589-70. APECKC)
Cassette holder
(DECK 2)
1. Pull out the shaft.
Rib Rib
2. Push the rib in the direction of arrow and then remove the
cassette holder.