Technics RS-TR165

PIAYDACK cones
To locate and play a certain tune
WTo search for a desired part of the tape while
listening to sounds at high speed
This function is convenient for locating the beginning of a tune
(non-recorded portion) since sound monitoring is possible while
searching.
Press and hold the rewind/review, or fast-forward/cue button
(deck 1 or 2) during playback. Normal playback will resume from
the point where the button is released.
(The playback indicator will begin quick flashing.)
During playback of side “A” (forward) (>):
Press to cue (fast-forward)
Press to review (rewind)
Press to cue (fast-forward)
Press to review (rewind)
During
playback
of
side
“B”
(reverse)
(<q):
(deck
2 only)
Press to review (rewind)
Press
to
cue
(fast-forward)
Note:
The cue/review function causes sounds to become high pitched.
During this function, be sure to decrease the amplifier’s volume
to
prevent
damage
to
the
speaker
system's
tweeters.
HiTo fast-forward or rewind the tape
While in the stop mode, press the appropriate button according
to the figures above.
Note:
Cassette tapes in deck 1 and deck 2 can be advanced or rewound
at the same time.
=10=
To listen through headphones
ES Ee Se ee i Oe)
a
Lt
ees
Headphones
(not included)
Connect the headphones (not included) to the
headphones jack.
Plug type: 1/4 inch phone plug, stereo type.
Note:
Avoid listening for prolonged periods of time to prevent hearing
loss.
Automatic-tape-select function
This unit is equipped with the automatic-tape-select feature; it
automatically detects the type of tape being used, and then
makes the suitable adjustments of the bias and equalization
accordingly.