Technics RS-TR252

10.
Preparation
Wind the tape past the leader tape section so that recording can
begin straight away.
EJECT Press EJECT on Deck 2, and
then Insert the cassette
tape to be used for recor-
ding.
dgtey NR = Press either DOLBY NR B or
0.0 C to select the desired
®» nolse-reduction system.
(Refer to the opposite page.)
Dolby noise-reduction indicator { |B] or [C])
REVERSEMODE Press .—, Ci or ox to
select the desired reverse
mode.
Reverse-mode indicator ([——
C2 or OS)
<= : Only one side will ba recorded, and then opera-
tion will automatically stop.
C32 : Both sides (the forward side first, and then the
© reverse side) will be recorded, and then opera-
tion will automatically stop.
by mode.)
illuminates
REC Press @ REC.
Say {The unit will be in the recording stand-
Play the source in order to
adjust the recording sound.
6 ""reo.evel Use the REC LEVEL control
to adjust the recording levei.
(Refer to the opposite page.)
ray | Press <4 PLAY or ® PLAY to
begin recording, and play
the source to be recorded,
® PLAY : Forward side
“@ PLAY : Reverse side
a a ofes_
= [> empiay
lluminates
When recording on both sides of the
tape, be sure to press the PLAY but-
ton.
To temporarily stop recording
PAUSE _ Press [if] PAUSE.
To resume recording, press the play button cor-
responding to the side of the tape being record-
ed upon.
To stop recording
eae Press Mi STOP.