Technics RS-TR252

Both sides of the tape in Deck 1 will be played, followed by both
sides of the tape in Deck 2. (Repeated up to eight times.)
41812
Or oo o.O
a ‘erCK) a cK2
SS
he ie es5cc4
| SEES |
Note that for series playback it is not possible to select different
types of Dolby NR for Deck 1 and Deck 2, It is recommended that
you use two tapes which were recorded using the same type of
Dolby NR (or both recorded without Dolby NR).
1 EJECT Press EJECT on both decks,
and then Insert the cassette
oo.syNR Press elther DOLBY NR B or
Oo 0 C to select the appropriate
» nolse-reduction system.
Press » PLAY on Deck 1.
(Series playback will begin from the
forward side of the tape in Deck 1.)
ye), TS
To temporarily stop playback
{Deck 2 only)
Pause Press (| PAUSE.
To resume playback, press the play button cor-
tesponding to the side of the tape being ptayed.
To stop playback
lege Press Mf STOP for the deck which Is
R playing.
G
For your reference:
It is also possible to begin series playback from the reverse side
of the tape in Deck 1 or from Deck 2. (Refer to the tape travel
table on page 7.)
The tape counter indicates the amount of tape travel as a
numerical value based on the number of revolutions of the tape
hub,
Deck 2
Tape counter
ce a a
fe Ses. ate =
COUNTER AESET
O
To reset the tape counter
counten Press COUNTER RESET.
The tape counter Indication will return to “000”.
%
For your reference:
When the tape Is travelling in the reverse direction, the value
displayed on the tape counter will count down.
After 000" is reached, the display will switch to “999” and will
then continue counting down.