Technics RS-TR474 Operating Instructions

10
The tape counter indicates the amount of tape travel as a
numerical value based on the number of revolutions of the tape
hub.
Tape counter Tape counter Tape side indicator Tape side indicator
Onn
rence |
COUNTER t COUNTER 2
RESET RESET
i
To reset the tape counter_
counreRt Press COUNTER RESET.
RESEY, The tape counter indication will return to “O00”.
or >>.
Because this unit is capable of playing back both sides of the
tape, the operation changes in accordance with the diraction of
the tape side indicator.
For your reference:
When the tape is travelling in the reverse direction, the value
displayed on the tape counter wil! count down. Tape side
After "000" is reached, the display will switch to “999” and will indicator
then continue counting down
+ Cassette tapes in deck 1 and deck 2 can be advanced or re-
wound at the same time.
High-speed tape transport
When fast-forwarding from near the beginning of the tape or
wher rewinding from near the end of the tapa, the tape travel
speed will be faster than that during normal fast-forwarding or re-
wind.
{During high-speed tape transpart. the:
indication will ight up.)
This high-speed tape transport will also function during TPS.

Technics RS-TR474 Specifications

General

Track System	4-track, 2-channel stereo
Tape Speed	4.8 cm/s
Frequency Response	20Hz to 17kHz (Metal tape)
Type	Cassette Deck
Heads	1 x Record/Playback, 1 x Erase
Motor	DC motor
Output	400mV (Line)
Dimensions	430 x 125 x 290mm
Power Supply	220-240V AC, 50Hz