Technics RS-X101 Service Manual

RS-X101
Mi CONVENIENT FEATURES FOR RECORDING
Automatic-record-muting function
By simply pressing the automatic-record-muting button while a
recording is being made, a silent interval (which is necessary for
locating the beginning of a tune) can be made.
Automatic-record-muting button
This feature is also convenient for omitting, during recording,
unwanted material such as commercial messages, etc.
M@ TIMER RECORDING/PLAYBACK
If this unit is connected to the tuner (ST-X301L) with the audio timer, recording of radio broadcasts or tape playback will automatically begin at
the preset time.
(See the operating instructions of the tuner for detailed information.)
Note:
Playback of one deck only can only be done by deck 2.
Timer recording (tape deck 2 only)
1. Prepare for recording.
After adjusting the recording level, press the stop button.
Check the tape side (‘'A”’ or ‘‘B’’) to be recorded on to be sure
it is correct.
2. Set the tuner to the desired recording-start time and
select the recording mode (({ REC).
(At the set time, the power will be switched on and the input
selector of the amplifier will be switched to “TUNER”; the
recording will then begin.)
@ After setting the timer
Check to be sure that the power switch of the amplifier and the
DECK ON/OFF switch of the cassette deck are set to the “ON”
position.
During the recording,
press the automatic-
record-muting button
one time.
To resume recording,
press the playback
button corresponding
to the side being
recorded.
Commercial
announcements, etc.
FM broadcasts | AV
ar:
A silent interval of about 4 seconds will be made on the tape,
and then will change to the recording stand-by mode.
fiih
Record mode
@ To make a silent interval of more than 4 seconds on the
tape
Press the automatic-record-muting button for the
necessary number of seconds.
The unit will change to the recording stand-by mode when
the button is released.
Synchro-recording
This is a convenient feature that, when this unit is in the recor-
ding stand-by mode, will start the recording automatically when
the compact disc player or turntable begins playing. When the
play stops, a silent interval of about 4 seconds will be made, and
the tape deck will change to the recording stand-by mode.
This synchro-recording feature can only be used in combination
with a Technics compact disc player or turntable that also has
the synchro-recording function.
Timer playback
Series playback (tape deck 2 and then tape deck 1) is also
possible.
1. Rewind the tape to the position from which you want
playback to begin.
Check the tape side (“A” or ‘B”) to be played backto be sure
it is correct.
2. Set the tuner to the desired playback-start time and
select the playback mode ({ PLAY).
(At the set time, the power will be switched on ani the input
selector of the amplifier will be switched to “TAPE”; the
playback will then begin.)
@ After setting the timer
Check to be sure that the power switch of the amplifier and the
DECK ON/OFF switch of the cassette deck are set tothe “ON”
position.

Technics RS-X101 Specifications

General

Brand	Technics
Model	RS-X101
Category	Cassette Player
Language	English