Technics RS-X933 - DISASSEMBLY INSTRUCTIONS; CABINET AND FRONT PANEL REMOVAL

RS-X933
@
DISASSEMBLY
INSTRUCTIONS
Removal
of
the
Cabinet
Removal
of
the
Front
Panel
1. Remove the 8 flat cables (CN3, CN4,
1+2 CN5, CN6, CN7, CN8, CN9, CN10).
2. Remove the 2 connections (CP1, CP2).
3. Remove the 3 screws (@~®).
4. Remove the front panel in the
direction of the arrow.
Procedure | ie Es EB, GC, GN] areas.
1. Remove the 8 screws (@~®).
1-2-3
Rear Panel
How to remove the flat cable
¢ Pull out the flat cable while 1. Lift the connector.
pressing the connector. 2. Pull out the flat cable.
My. Flat cable
y Flat cable | je
Connector
[EG] area.
1. Remove the 10 screws (O~®@®).
2. Release the 2 claws of the AC OUT LET cover.