Ground the soldering iron.
Put a conductive mat on the work table.
Do not touch the legs of IC or LSI with the fingers directly.
- Voltage and signal line
: Positive voltage line
: Negative voltage line
: AM signal line
: AM OSC signal line
: FM signal line
: FM OSC signal line
: Audio signal line
9. Schematic Diagram
10. Printed Circuit Board Diagram
11. Type Illustration of ICs, Transistors and Diodes
12. Wiring Connection Diagram
13. Block Diagram
14. Terminal Function of ICs
14.1. IC901 (C2BBFD000317): / System Control/FL Drive
14