Technics SA-GX130D

• Loudness indicator
BASS
Technics STEREO SYNTHESIZER RECEIVE
FOwtB
□
mnf.HTQ.rmei
= □
louo
:SS
i * |
—
—
r~-1 **"
’ I 2 l 3 1 *
s 1 • 1 7 1 • 1 •
CD
□ □
- TOW OQKTPQL-
remote control
Headphones (not included)
Plug type:
6.3 mm phone plug stereo type
To adjust to the desired tone
quality _
BASS |
Adjust the low-frequency sound to the desired
tone quality.
[treble]
Adjust the high-frequency sound to the desired
tone quality.
| When listening through headphones
• Use the volume control to reduce the volume level, and con¬
nect the headphones to the headphones jack.
• If sound from the speakers is not wanted, set the speaker selec¬
tors ("SPEAKERS”) to the “OFF" position.
• Avoid listening for prolonged periods of time to prevent hearing
damage.
To emphasize low-frequency
sound _
LOUDNESS
Set the loudness switch to “ON” position.
The loudness indicator will illuminate.
(Refer to item ® on page 11.)
To adjust the ieft/riqht sound balance
| BALANCE1
Adjust the balance control.