Technics SA-GX170 Operating Instructions

D
|
-«2iSron
Press
BAND
to
select
“FM”,
“MW”
or
“rw”,
Ce ‘Set to the frequency from which you
want to start automatic memory preset-
ting. (Follow steps 3 and 4 on page 13.)
4] - Mevory Press MEMORY until the fre-
quency begins to change.
(Automatic memory presetting will
start.)
To stop press MEMORY once again.
When a broadcast station is preset
The memory indicator and the preset channel number will be
displayed for approximately 1 second.
MEMORY
Iluminates
When presetting is completed
The last broadcast station to be preset will be displayed.
Correct presetting may not be possible in cases where the broad-
Cast waves are too strong or too weak. In such cases, carry out
presetting manually.
-BAND Press BAND to select “FM”,
ALLOCATION
“MW” or iT LW”.
3 Set to the desired broadcast.
(Follow steps 3 and 4 on page 13 or step 3 on page
14.)
You can also set the stereo mode to the monaural
position.
Tal Memory Press MEMORY momentari-
lluminates
ng MEMORY
tock stereo §6f f //] (TT I
FM PLE ELE we
To cancel the memory function, press
MEMORY again.
Specify the desired channel
5 frome be preset using the
numeric button(s) (com-
pletes presetting).
(Example: Channel 12)
[1] [2]
(Within 2 sec.)
MEMORY
To continue presetting
Repeat steps 2 through 5.
15

Technics SA-GX170 Specifications

General

Brand	Technics
Model	SA-GX170
Category	Stereo Receiver
Language	English