Technics SA-GX170 Operating Instructions

16
Preset tuning (continued)
To listen to preset broadcast stations
1 Messi, es Specify the preset channel
CL i2i3i\\L2lojusing the numeric button(s).
(Example: Channel 12)
Sa
(Within 2 sec.)
QUARTZ
=
I
tock
sterneco
f/f
[f
[|
{IJ
]
®
FM
!
Ll
ft
tl
il
MHz
To confirm the channel number of the broadcast
station being received
Press TUNER.
(The channei number wilt be displayed for about one second.)
The channel number is not displayed if you change the reception
frequency or FM mode setting.
For your reference:
Even if the power is switched to the standby condition or the
power cord is disconnected from the household AC outlet, the
contents of the memory will continue to be stored for approx-
imately one month.
lf frequency presettings are accidentally erased
Make the frequency presettings once again.
The power cord should remain connected for one hour or more
for the memory back-up to be effective.
Tape recording on the tape deck or
digital compact cassette (DCC)
Before recording, prepare the tape deck or DCC for recording
(recording level adjustment, etc.).
See the tape deck’s or DCC’s operating instructions for details.
TAPE/DCC [MONITOR
ei
ieelest
the
audio/video
C source to be recorded.
Begin recording.
Follow your tape deck’s or DCC’s
operating instructions.
3 eles dusish eet seek Se ene = sans ee
source to be recorded.
To check the sound recorded while recording is
being made
With a tape deck with 3 heads, it is possible to check the sound
recorded on the tape.
Press TAPE/DCC [MONITOR] on this unit and set the monitor button
on the tape deck to “TAPE”.
Ituminates
Weck” stereo
a ee: ae a
Press TAPE/DCC [MONITOR] once again to turn it off.

Technics SA-GX170 Specifications

General

Brand	Technics
Model	SA-GX170
Category	Stereo Receiver
Language	English