Technics SA-GX230 Service Manual

SA-GX230 |
Compact disc player controls
Press this button first to use the [1] — buttons.
= |
Press these buttons to select the desired track.
Playback begins from the track selected.
When these buttons are used, be sure to first press the "CD" but-
ton.
Tracks 1—9:
Press the appropriate numeric button с E à directly.
To select a two-digit track number over 10:
Press the c3 button the necessary number of time to select the
"tens" digit, and then one of the © — c buttons to select the
"units" digit.
E
If a Technics multi compact disc player is used in combination
with this unit, the disc to be played can be selected by first press-
ing this button and then pressing the appropriate numeric button
ТҮРЕН
Press this button to select the desired play made.
(“РВООНАМ” or "CONTINUE")
Press one of these buttons briefly to move the pick-up to the
-—
Е
beginning
of
а
specific
track.
TUNER
.
|
co
2
os
EZ]
СС)
[>
PLAY]
2 3 5
Facing toward the main unit
Dv
:
ress this button to start play.
Press this button to stop play.
PROGRAM
MODE
Note:
ею C2 E
When operating a compact disc player with a remote control sen-
sor, face this remote contro! transmitter toward the remote con-
trol sensor of the compact disc player.
заь.
:
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-SA302E
Technics
[р] Amplifier controls
Press this button to select the “VCR 1” input selector on the main
unit.
Press this button to temporarily reduce the volume level. —
The volume level is attenuated by 20 dB (approx. 1/10). TE
Press once again to return to the previous volume level.
Press one of these buttons to adjust the volume level.
— 8 —

Technics SA-GX230 Specifications

General

Brand	Technics
Model	SA-GX230
Category	Stereo Receiver
Language	English