Technics SC-CH404

To adjust EQ and SPACE
(“USER” mode)
1
2
Select the equalization curve
or simulated listening environ¬
ment of which you want to ad¬
just the tone.
(See pages 38-39.)
Press A or ▼ to adjust the
equalization curve or simu¬
lated listening environment.
: To Increase the effect
To decrease the effect
.«*«*• uult, cowmtx.
r Tl TT-puct
CL ERR ™ J - - -j
Lights.
Once you have made the adjustment, the
system automatically stores the simu¬
lated listening environment or equaliza¬
tion curve as the USER mode in its
memory.
To listen with augmented bass (V.BASS)
V.BASS
Press V.BASS to ON.
r Ti
i- n
vomit much c owmen.
-TOCT
-MLftt
M
CL ERR Mp-'
V.BASS indicator lights.-1
V.BASS
To cancel the V.BASS effect:
Press V.BASS once again.
Notes.
•You cannot make a recording with the V.BASS effect. While record¬
ing, V.BASS mode cannot be activated.
•V.BASS indicator goes out while recording, and lights when record¬
ing finishes.
To retrieve the USER mode:
1. Select the desired equalization curve or simulated listening envi¬
ronment.
2. Press and hold MODE to select USER.
For your reference:
Any adjustment will not affect the PRESET modes (equalization
curves or simulated listening environments preprogrammed to this
system).
USER modes will continue to be stored for approximately 2 weeks
even if the power supply cord is disconnected.
40