Technics SC-CH404

The functions indicated by the numbers with black background {for
example O) can also be activated from the remote control transmit¬
ter. (See pages 50-51.)
Amplifier section
Tuner/soundprocessor section
No- _ Name _ Ref pag e
o Power “STANDBY Ci)/ON” switch
(POWER, STANDBY cb/ON) 17
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
© Standby indicator (STANDBY)
When the unit is connected to the AC mains supply, this indica¬
tor lights up in standby mode and goes out when the unit is
turned on.
® Power indicator (POWER)
© Volume control (VOLUME) 20
© Headphones jack (PHONES ) 28
© Microphone jack (MIC) 48
® Microphone volume control
(MIC VOLUME) 48
_ Name
External source input select button
(EXT)
Ref page
© Internal source input select button (INT)
© Tuner source/band select button and
indicator (TUNER/BA ND) 18
@ Multi-control buttons
(MULTI CONTROL) _ 14,17,18,38,42
© Record timer bu tton (Q REC) 45
© Remote control signal se nsor (SENSOR) 16
© Play timer butt on ({3 PLAY) 43
© V.bass button (V.BASS ) 40
© Voice mute button (KARAOKE) 48
EQ/SPACE mode ON/FLAT button
(ON/FLAT)
EQ/SPACE mode select button
(MODE)
38,39
Clock/timer button (CLOCK/TIMER) 17, 42-46