Technics SC-EH580 User Manual

34
RQT6301
Timer operations and convenient functions
A
DISPLAY MODE
DISPLAY MODE
B
C
VCR/AUX/
6CH INPUT
TAPE/
DECK 1/2
TUNER/
BAND
2/;
1∫
MUTING
45
j
VOLUME
i
CD
VOLUME
MUTING
MUTING
PHONES
MUTING
EH680
EH680
MUTING
a
b
c
»A Changing the sound range display
The sound processor shows the level of each sound range with the three
types of display described below.
Press [DISPLAY MODE].
The spectrum display will change as follows.
[a] Normal display
This display indicates the strength of the sound in each tonal range.
[b] Peak-hold display
The peak sound value of each sound range is held on the display for
about one second after it occurs.
[c] Aurora display
The peak sound value of each sound range is displayed in inverted
form.
»B Muting the volume
[EH780] [EH580]
Remote control only
Press [MUTING].
Volume is reduced to minimum.
[EH680]
On the remote control or the tuner/amplifier
Press [MUTING].
The indicator lights green and volume is reduced to minimum.
To cancel
Press [MUTING] again.
“MUTING” goes out and the volume is restored.
To cancel from the tuner/amplifier, turn [VOLUME] to minimum (–– dB),
then raise it to the required level.
Muting is also canceled when the unit is turned off.
»C Using headphones (not included)
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing damage.
Plug type: 3.5 mm stereo
(On the sound processor)

Technics SC-EH580 Specifications