Technics SL-1210MK7 User Manual

Before use
English
(05)
05
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 10-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating
of 10-ampere and that it is approved by ASTA
or BSI to BS1362.
Check for the ASTA mark or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased
from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the
type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains
plug.
1. Open the fuse cover with a screwdriver.
Figure A Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse
cover.
Figure A Figure B
Fuse
(10 ampere)
Fuse
(10 ampere)

Technics SL-1210MK7 Specifications

General

Type	Direct drive DJ turntable
Operation	Manual
Start-up time	0.7 s
Wow & flutter	0.025 %
Nominal speeds	33 1/3, 45, 78 RPM
Starting torque	1.8 kg/cm
Number of speeds	3
Product color	Black
Platter material	Aluminum
Shape	J-shaped tonearm
Overhang	15 mm
Tonearm type	Statically balanced tonearm
Tracking angle	32 °
Stylus pressure	4 g
USB port	-
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	8 W
Dust cover included	Yes

Weight and Dimensions

Depth	353 mm
Width	453 mm
Height	169 mm
Weight	9600 g