Technics SL-EH60 Service Manual

SL-EH60 |
2. Removal for the traverse unit
NOTE
Lock
lever
(L)
Locate the traverse unit to the
position “DOWN”.
(Rotate the drive gear in the
direction of arrow so that the
position is “DOWN”.)
© Slide plate 2
Lock lever (S)
(Back side of CD changer mechanism)
Slide plate 1
Procedures
Qed | Push the lock lever (S) with lifting the claw, and then push the lock lever (L) in the direction of arrow (=).
Refer to the figures @)and @).
CSW) | The slide plate 1 and 2 of traverse retain boss €) and @ are open.
Refer to the figures ©and®).
GED | Push the traverse unit in the direction of arrow (=).
(The FFC is connected.) Lb
GEEZ) | The traverse unit will be removed.
3. Disassembly for the CD changer unit
NOTE
Locate the traverse unit to the position “DOWN”.
GED | Release the 2 claws, and then remove the
switch P.C.B..
Remove the 6 screws.
Switch P.C.B.

Technics SL-EH60 Specifications

General

Brand	Technics
Model	SL-EH60
Category	CD Player
Language	English