Technics SL-PS900 - Disassembly Instructions - Part 3; Drive Mechanism Components

Ref. No.
11
Procedure
1-10-11
side of
white paint
Claw with projection
4.
While
lifting
the
claw
with
a
screwdriver,
rotate
yoke
in
the
direction
of.
arrow
and
remove
the
yoke
and
magnet.
2. Release the 3 claws of the clamper.
Ref. No.
13
Procedure
1-10-1213
1. Remove the tray spring from claw.
2. Remove the 1 screw (@).
3. Remove the tray spring and slide plate.
4,
Remove
the
disc
tray
ass’y
in
the
direction
of
arrow
@,
@.
SL-PS900
canoe
of
whe
yoke:
magnecens
Removal
of
the
rotation
lever
Procedure
1-10-12
Remove. the rotation lever in the directions of @,
@, ©.
ites
of
the
tray
spring
and
slide
Removal
of
the
disc
tray
ass’y
Procedure
1—2-—9-10
12-13-14
Pulley gear
Traverse unit
1. Turn the pulley gear in the direction of arrow @
until the traverse unit comes down.
Dise tray ass’y
2. Pull the disc tray ass’y in the direction of arrow
@.
| 3. Remove the 3 screws (@~®).