22
1 Press [NWP].
2 Press [N INPUT O] below [NWP] repeatedly
to select “Bluetooth”.
≥“Ready” is indicated on the display.
≥If you press [1/;], this unit will try and connect to the
last connected Bluetooth
®
device.
–“Linking” is indicated on the display.
3 Select “ST-C700D” from the Bluetooth
®
device’s menu.
≥The name of the connected device is indicated on the
display.
4 Start playback on the Bluetooth
®
device.
Operations on the remote control
≥ This unit can only be connected to one device at a time.
≥ To use this unit’s remote control with a Bluetooth
®
device, the
Bluetooth
®
device must support AVRCP (Audio Video Remote
Control Profile).
Depending on the status of the device, some controls may not
work.
≥ When enjoying video contents with this function, the video and
audio output may not be synchronised.
You can change the transmission mode to prioritise
transmission quality or sound quality.
1 Press [NWP].
2 Press [N INPUT O] below [NWP] repeatedly
to select “Bluetooth”.
≥If a Bluetooth
®
device is already connected, disconnect
it.
3 Press [MENU].
4 Press [3, 4] repeatedly to select
“Link Mode” and then press [OK].
5 Press [3, 4] to select the mode and then
press [OK].
≥ Select “Mode 1” if the sound is interrupted.
1 Press [NWP].
2 Press [MENU].
3 Press [3, 4] repeatedly to select
“Disconnect?” and then press [OK].
4 Press [3, 4] to select “Yes” and then press
[OK].
≥ The Bluetooth
®
device will be disconnected if a different audio
source is selected.
Listening to music stored on a
Bluetooth
®
device
Stop Press [∫].
Pause
Press [1/;].
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
Search
During play or pause, press and hold
[6] or [5].
≥
On the unit: press and hold [
:
] or [
9
].
Bluetooth
®
transmission mode
Mode 1 Emphasis on connectivity
Mode 2 Emphasis on sound quality (default)
Disconnecting a Bluetooth
®
device
(22)
ST-C700DE-TQBM0007.book 22 ページ ２０１６年１０月２６日 水曜日 午後１時１７分
To Next Page
Loading...
Need help?
General