23
English
Listening to FM radio
You can preset up to 30 channels.
Preparation
≥Press [NWP] and then [N INPUT O] below [NWP]
repeatedly to select “FM”.
1 Press [NWP].
2 Press [MENU].
3 Press [3, 4] repeatedly to select “Auto
Preset” and then press [OK].
4 Press [3, 4] to select “Lowest” or “Current”
and then press [OK].
Lowest:
To begin auto preset with the lowest frequency (FM
87.50).
Current:
To begin auto preset with the current frequency.
1 Press [NWP].
2 Press [6] or [5] to tune in to the station.
≥To tune automatically, press and hold the button until
the frequency starts changing quickly.
3 Press [PGM].
4 Press the numeric buttons to select a preset
number.
≥Do steps 1 through 3 again to preset more stations.
≥ A station previously stored is overwritten when another station is
stored in the same preset number.
1 Press [NWP].
2 Press the numeric buttons, [:] or [9] to
select the preset station.
1 Press [NWP].
2 Press [MENU].
3 Press [3, 4] repeatedly to select “FM
Mode” and then press [OK].
4 Press [3, 4] to select “Mono” and then
press [OK].
≥“MONO” is displayed.
To memorise the setting
Continue with steps 2 and 3 of “Manual tuning and
presetting”.
≥ Select “Stereo” in step 4 to return to stereo broadcasts.
≥ “Mono” is cancelled if the frequency is changed.
The unit can display the text data transmitted by the radio
data system (RDS) available in some areas.
≥ RDS is available only when stereo works in reception.
≥ RDS displays may not be available if reception is poor.
≥ RDS function does not work if “Mono” is selected in “FM Mode”.
(> above)
Automatic presetting
Manual tuning and presetting
Selecting a preset station
Improving the sound quality
RDS broadcasting
(23)
ST-C700DE-TQBM0007.book 23 ページ ２０１６年１０月２６日 水曜日 午後１時１７分
To Next Page
Loading...
Need help?
General