Technics SX-KN7000P User Manual

MIC
A microphone can be connected to this terminal.
LINE IN
This terminal receives input signals from an ex-
ternal instrument. To receive a monaural signal,
connect to the R/MONO terminal.
The input signal volume can be adjusted using
the LINE IN VOLUME controller on the control
panel unit.
AUX IN
This terminal receives input signals from an ex-
ternal instrument. To receive a monaural signal,
connect to the R/MONO terminal.
The input signal volume is not affected by the
instrument’s MAIN VOLUME setting.
SUB OUT
The sounds from desired parts can be output
independently from those terminals.
MAIN OUT
The total sound of this instrument can be output
from this terminal.
Block diagram
MONITOR SETTING
(Right side)
MIC SUB OUT
USB (OUT)
LINE OUT
MAIN OUT
MAIN
VOLUME
MONITOR
SETTING*
LINE IN
USB (IN)
AUX IN
Sound generator
(Speakers &
Headphones)

Technics SX-KN7000P Specifications

General

Brand	Technics
Model	SX-KN7000P
Category	Electronic Keyboard
Language	English