PartVI
Settingtherunetlons
ACCOMPVOLUME
You can adjust the volume of each part (ACCOMP
1, 2, 3) of the AUTO PLAY CHORD inde-
pendently, thereby controlling the balance among
the three parts.
1. Use the SOUND button to select ACCOMP
VOLUME.
SOUND
0 OCTAVESHIFT
,O}EVERBDEPTH
Q
-8-ACCOMPVOLUME
/o'PIANO TUNING ~
0 TOUCHSENSITIVITY\ (
2. Select the part whose volume you will adjust
by pressing the relevant button in the SE-
QUENCER section (ACCOMP1, ACCOMP2 or
ACCOMP3).
-.;
OBASS
OORUMS
CD
~
. The indicator of the selected part flashes.
3. Use the TRANSPOSE/PROGRAM buttons to
set the volume.
MUSICAl OISPLA'
[
o'~
~. ~.
'\)-~ (
.
Select from ten levels (0-9). At level 0, no
sound is produced for that part.
. Repeat steps 2 and 3 to set the volume levels
for the other ACCOMP parts.
,-
]
0
-,
,N..0
PIANOTUNING
With this function you can select the type of tuning
for your instrument.
1. Use the SOUND button to select PIANO
TUNING.
SOUND
0 OCTAVESHIFT
0 REVERBDEPTH
0
'o}CCOMPVOLUME
- 8.f'IANO TUNING ~
/ <!>'rOUCHSENSITIVITY\ (
2. Use the TRANSPOSE/PROGRAM buttons to
select" 0 n " or " 0 F F ".
MUSICAlOISPlAY
1011 I
".H'
o~
1-)-0
]
Standard piano tuning, in which the
lower pitches are tuned slightly
lower and the higher pitches are
tuned slightly higher.
-,
'N..0
[on
I II C C lone octave is dividedintopitchesof
LI I I 12 equally spaced intervals.
TOUCHSENSITIVITY
Specify the degree of Touch Response.
1. Use the SOUND button to select TOUCH SEN-
SITIVITY.
SOUND
0 OCTAVESHIFT
0 REVERBDEPTH
0
0 ACCOMPVOLUME
oJIANOTUNING
~
~..f{)UCH SENSITIVITY
/1'
2. Use the TRANSPOSE/PROGRAM buttons to
adjust the degree of touch sensitivity.
MUSICAl OISPlAY
Of \
"lJ
\
0 O~
rr-0
""',
,N.. 0
. Select from ten levels (0-9). The higher the
value, the greater the degree of keyboard touch
sensitivity. At level 0, the volume is the same
regardless of how hard or softly the keyboard
is played.
38
To Next Page
Loading...
Need help?
General
