- FJASP P.C.B.
(Step1)
Remove the 4 screws ×2 and ×2 (refer to [Fig. 8]).
(Step2)
Release the claws of the 3 P.C.B. holders.
- COM P.C.B.
(Step1)
Remove the screw (refer to [Fig. 8]).
(Step2)
Release the claws of the 2 P.C.B. holders.
- HP P.C.B.
Follow the item 9.3.
(Step1)
Remove the headphone jack mounting nuts ×2 (refer to [Fig. 8]).
(Step2)
Remove the ground wire holding screw (refer to [Fig. 8]).
(Step2)
Remove the HP P.C.B. mounting screws ×2 (refer to [Fig. 8]).
[Fig. 8]
11