15. Schematic Diagram
16. Printed Circuit Board Diagram
17. Block Diagram
18. Wiring Connection Diagram
19. Replacement Parts List
Notes:
*Important safety notice: / Components identified by mark have special characteristics
important for safety. / Funrthermore, special parts which have purposes of fire-retardant
(resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. / When
replacing any of components, be sure to use only manufacture’s specified parts shown in the
parts list. / *Warning: This product uses a laser diode. Refer to caution statements.
*ACHTUNG:Die lasereinheit nicht zerlegen.Die lasereinheit darf nur gegen einc vom hersteller
spezifizierte einheit ausgetauscht werden.
*Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-farads (pF) F=
Farads (F) / *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M=
1,000K (OHM)
*The marking <RTL> indicates that the Retention Time is limited for this item. After the
discontinuation of this assembly in production, the item will continue to be available for a
specific period of time. The retention period of availability is dependant on the type of assembly ,
and in accordance with the laws governing part and product retention. After the end of this
period, the assembly will no longer be available.
*Since SW consists of buttons and P.C.B.s, we do not supply it as an individual part (refer to
“20. Cabiner Parts Location “ and “21. Manual Keyboard Parts Location“.).
*“<IA>”-“<IE>”, marks in Remarks indicate languages of instruction manuals. [<IA> : English,
<IB> : English / Spanish / Chinese / Danish, <IC> : English / French / Nerderlands / Italian, <ID> :
German, <IE> : French / Nerderlands / Italian / German]
21
To Next Page
Loading...
