POWER REQUIREMENT 110W
100W (NORTH AMERICA AND
MEXICO)
AC120/ 220/ 230-240V 50/ 60Hz
AC120V 60Hz (NORTH
AMERICA AND MEXICO)
AC230-240V 50/ 60Hz (EUROPE,
AUSTRALIA, AND NEW
ZEALAND)
DIMENSIONES (W×H×D) 138.7cm×103.2cm×48.5cm
(54-19/32”×40-5/8”×19-3/32”)
NET WEIGHT 47kg (103.6lbs)
ACCESSORIES AC CORD, MUSIC STAND
2000 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1. WARNING
To prevent the risk of fire, smoke, or electrical shock and to ensure safe operation, please be
sure to follow the safety guidelines below.
1. At places where special caution is required, the necessary safety
precautions are clearly labeled or printed, for example, on the
cabinet, or on the part concerned. Please follow these safety
precautions, and also those listed in the Owner's Manual.
2. Parts which have a ; mark in the circuit diagram or in the parts
list are essential for safety. When replacing these parts, be sure to
use only the specified parts.
3. Use the specified types for internal wiring (double-insulated
wiring, etc.).
4. When replacing parts on the AC primary side (power transformer,
electric switch, electrical cord, noise-prevention condenser, etc.),
wind the lead wire and secure it by soldering.
5. Do not let the wiring come into contact with heat-emitting devices
(fuse resistor, radiator plate, etc.).
6. When replacing the wiring, make sure that it is not in contact with
3
To Next Page
Loading...
Need help?
General
