Need help?Do you have a question about the Technifor XM700 and is the answer not in the manual?
Lists all items included in the machine's package.
Explains how to identify the machine using identification plates.
Details power connection, voltage, and battery specifications for the machine.
Lists CE compliance declarations and relevant European directives.
Mentions directives for batteries and WEEE, emphasizing environmental disposal.
Lists standards for laser products and how to obtain compliance lists.
Provides crucial safety instructions and warranty limitations for operation.
Describes the XM700 as a numerically controlled micro-percussion marking machine.
Details available fonts, character sizes, and character sets for marking.
Lists the dimensions, weight, and marking area of the XM700 machine.
Provides detailed drawings of the XM700 marking machine with measurements.
Lists and describes available accessories like carry cases and battery kits.
Describes the ventilator accessory used for cooling the stylus during high-factor operation.
Details the accessory used to illuminate the marking area with a high-power LED.
Shows the dimensional drawing of the side handle accessory for improved handling.
Provides dimensional drawings for the ventilator accessory.
Presents dimensional drawings for the marking area lighting accessory.
Explains the coordinate system, defining origin and axes for machine operation.
Details the procedure for adjusting the machine's foot for optimal marking distance.
Refers to the user manual for operating the T07 program and touch screen.
Guides on safely connecting the machine to battery and mains power sources.
Details charging time, operating time, and factors affecting battery life.
Provides advice on charging temperatures and using the correct charger for longevity.
Offers recommendations for storing the battery correctly to maintain its lifespan.
Lists essential safety precautions and recommendations for handling and using the battery.
Outlines monthly maintenance tasks, including stylus point cleaning and spring check.
Describes annual servicing requirements, including dismantling and part replacement by Gravotech.
Discusses monitoring marking quality and contacting distributors for periodic servicing.
Lists part numbers and descriptions for styli, points, and repair kits.
Details the measurement method and equipment for assessing vibration levels per ISO 5349-1.
Provides information on the maximum vibration levels experienced by the operator.
Explains the method and equipment for determining noise emission per ISO 12001.
Presents measured average and peak noise levels emitted by the machine during operation.
Lists contact details for various international branches of the Gravotech Group.
To Next Page
General