AFM Supplement DA 40 D
Page 2-1
Issue 2
Revision -, Aug. 2015
CHAPTER 2
OPERATING LIMITATIONS
2.4 POWERPLANT LIMITATIONS
a) Engine manufacturer: .......................Technify Motors GmbH
b) Engine designation: .....................................TAE 125-02-114
c) RPM limitations (shown as propeller PRM)
Maximum: .................................................................2300 RPM
Maximum overspeed:.......................... 2500 RPM (max 20 sec)
d) Engine Power
Max. take-off power: ................ 114 kW (155 HP) at 2300 RPM
Max. continuous power:........... 114 kW (155 HP) at 2300 RPM
Max. recommended cruise power:......................................85%
e) Oil Pressure
Min. oil pressure:.............................................................1.2 bar
Min. oil pressure (at Take-off power): .............................2.3 bar
Min. oil pressure (in flight):..............................................2.3 bar
Max. oil pressure:............................................................6.0 bar
Max. oil pressure (cold start < 20 sec.):..........................6.5 bar
g) Oil Temperature
Min. oil temperature (engine starting temp.): ....................-32°C
Min. oil temperature (min. operating limit temp.):...............50°C
Max. oil temperature: .......................................................140°C
h) Coolant Temperature
Min. coolant temp. (engine starting temp.):.......................-32°C
Min. coolant temp. (min. operating limit temp.): .................60°C
Max. coolant temperature: ...............................................105°C