EasyManua.ls Logo

Technify Motors CD-155 - User Manual

Default Icon
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Technify Motors GmbH
Platanenstraße 14
D - 09356 St. Egidien
Operation & Maintenance
Manual
CD-135
CD-155
Doc. No.: OM-02-02
Version: 4/8
Tel. +49 37204 696-0
Fax +49 37204 696-2912
www.continentaldiesel.de
support@continentaldiesel.de
CAUTION:
The Operation and Maintenance Manual
must be read completely before operating the
engine, as it contains important safety information
and information about the operation of the engine.
Note:
Please report any service difficulties to the Technical
Support Center at Technify Motors GmbH.
See above for contact information.
Note:
The Operation and Maintenance Manual
must be included at the time of sale
of the engine / aircraft.
Operation & Maintenance Manual - Issue 4 / Revision 8
P/N: 05-7200-H200223

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Technify Motors CD-155 and is the answer not in the manual?

Technify Motors CD-155 Specifications

General IconGeneral
Engine TypeCompression Ignition (Diesel)
Displacement1991 cm³
Starting SystemElectric Starter
Max Power9.5 HP @ 7500 RPM
Max Torque10.5 Nm @ 5500 RPM

Summary

Introduction

Safety Information

Lists general safety precautions for engine operation and handling.

Technical Data

Operation Limits

Defines critical operational limits for temperature, speed, and pressure.

Fuel; Oil; Coolant

Lists approved fuels, oils, and coolant types and specifications.

Operation

Pre-start Inspection

Outlines essential checks before starting the engine.

Start-up

Details the procedure for starting the engine safely.

Before Takeoff Check

Lists checks to be performed before takeoff.

FADEC and propeller pitch functional check

Tests FADEC and propeller pitch functions.

Airworthiness Limitations

Mandatory Maintenance Actions

Lists maintenance tasks required for airworthiness reasons.

Maintenance Schedules

Every 100 operating hours

Specifies maintenance actions required every 100 operating hours.

Every 300 operating hours

Specifies maintenance actions required every 300 operating hours.

Emergency Procedures

Engine Maintenance Checklist - After the 3 rd - 6 th operating hour

Engine Maintenance Checklist - General

Related product manuals