EasyManuals Logo

Technify Motors CD-155 User Manual

Default Icon
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
4
74
Revision no.:
Revision date:
7
20.07.2016
6.2.2 Every 100 operating hours
Visual inspection of the air filter
Visual inspection of the cooling system
Visual inspection of the oil system
(refer to Annex 2, Page 13 of this Chapter)
Visual inspection of the fuel system
(refer to Annex 2, Page 13 of this Chapter)
Visual inspection of the FADEC sensors
(refer to Annex 7, Page 20 of this Chapter)
Visual inspection of the exhaust system
Visual inspection of the v-ribbed belt
(refer to Annex 1, Page 12 of this Chapter)
Visual inspection of the clamp on the turbocharger
Visual inspection of all fuel, oil, cooling system lines and
hoses for chafe marks
(refer to RM-02-02 Chapter 05-20.03)
Visual inspection of the engine mount for chafe marks
Check the airframe fuel pump
(refer to the aircraft manufacturer's specifications)
Test the cooling system under pressure at 2.0 bar
Duration: 2 minutes. Max. 2.0 bar must not be exceeded!
Afterwards check for leakage
(refer to the aircraft manufacturer's specifications).
Perform an engine test run according to Chapter 4, Section
4.4.2, Page 5 of this Manual and read out the FADEC.
E-mail both the Real Time Log Files and Event Log Files to
Technify Motors GmbH
(refer to Annex 10, Page 38 of this Chapter).
Exchange the engine oil and the oil filter (refer to Annex 5,
Page 16 of this Chapter);
A sample of the oil and the used oil filter should be labeled,
stored in a clean container and made available to Technify
Motors GmbH on request for the complete engine life time.
The sample will be required for a later long-run analysis.
The label must show the aircraft serial number, registration
number, engine serial number, operation time and date.
Quantity of oil to be taken for sample: 100ml
Check the mixture ratio of the coolant
Replace the fuel filter (refer to the aircraft manufacturer's
specifications)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technify Motors CD-155 and is the answer not in the manual?

Technify Motors CD-155 Specifications

General IconGeneral
BrandTechnify Motors
ModelCD-155
CategoryEngine
LanguageEnglish

Related product manuals