Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-01-02
4
30.07.2014
4
8
Revision no.:
Revision date:
-
-
1.7 Packaging and Transport
The engine has been packaged at the factory for transport as
follows:
• Mounted on a support in a wooden crate
• Supplied with drying agent
• When the engine is transported by ship, it is packed
seaworthy
The packaging should be kept for re-use in a possible future
shipment.
1.8 Storage
The following must be observed during transport and subsequent
storage:
• Store only in workplaces that are suitable for the purpose
• Never store outside
• Ambient temperature: -25°C to +70°C
• Rel. humidity: less than 70%
• The shipping crate must be kept in a horizontal position
during storage
• The max. storage time is noted on the delivery note of the
engine
• Preservation of the engine. See Fig. 1.2.
CAUTION: Under no circumstances storage on the deck is allowed. The
engine should be stored as deep as possible below deck.
Fig. 1.2 Preservation of the engine
Customer / Distributor
Customer / Distributor
Re-preservation
Engine installed and
filled with fluids and lubricants
Engine started every month
To Next Page
Loading...
Need help?
General
