Technify Motors CD-135 - User Manual

Technify Motors GmbH
Platanenstraße 14
D - 09356 St. Egidien
Operation & Maintenance
Manual
CD-135
CD-155
Doc. No.: OM-02-02
Version: 4/8
Tel. +49 37204 696-0
Fax +49 37204 696-2912
www.continentaldiesel.de
support@continentaldiesel.de
 CAUTION:
The Operation and Maintenance Manual
must be read completely before operating the
engine, as it contains important safety information
and information about the operation of the engine.
 Note:
Please report any service difficulties to the Technical
Support Center at Technify Motors GmbH.
See above for contact information.
 Note:
The Operation and Maintenance Manual
must be included at the time of sale
of the engine / aircraft.
Operation & Maintenance Manual - Issue 4 / Revision 8
P/N: 05-7200-H200223

Technify Motors CD-135 Specifications

General

Brand	Technify Motors
Model	CD-135
Category	Engine
Language	English

Summary

Introduction to Engine Operation and Maintenance

General Safety Precautions and Symbols

Explains warning symbols and general safety rules to prevent injury and damage.

Personnel Qualifications for Engine Maintenance

Engine Service Life Limitations

General Engine Safety Information

Provides critical safety information, warnings, and precautions for engine operation.

Engine Description and Dimensions

Engine Description and Standard Version

Engine Technical Specifications

Engine Dimensions and Weight Specifications

Engine Performance Data

Details on takeoff, continuous, and cruise power for CD-135 and CD-155 models.

Engine Operational Parameters

Engine Operating Limits and Conditions

Defines the minimum and maximum limits for oil, coolant, and gearbox temperatures.

Approved Fuels, Oils, and Coolants

Engine Power Curves by Altitude

Engine Operation Procedures

Pre-start Engine Inspection Checklist

Engine Startup Procedure

Engine Warm-up Guidelines

Pre-Takeoff Engine Checks

Covers critical checks before takeoff, including FADEC and propeller pitch functional tests.

Airworthiness Limitations and Maintenance

Mandatory Maintenance Actions Schedule

Lists mandatory maintenance tasks based on operating hours and time intervals.

Exceeding Maintenance Action Intervals

Engine Maintenance Schedules and Intervals

Pre-flight Inspection Checklist

Maintenance Actions by Operating Hours

Lists maintenance tasks required at specific operating hour intervals.

Maintenance Actions by Time Intervals

Lists maintenance tasks required at specific calendar time intervals.

Emergency Procedures for Engine Malfunctions

Emergency Procedure for Power Loss

FADEC System Operation and Fault Handling

Explains FADEC system operation, including automatic switching and manual override.

Engine System Malfunction Indicators

Describes actions for engine malfunctions indicated by FADEC light flashing.

Engine Restart Procedure After Failure

Emergency Procedure for Engine Compartment Fire

Actions to take in case of a fire in the engine compartment, including shutdown.

Procedure for Air in Fuel System During Flight

Procedure for Low Oil Pressure During Flight

Actions to take if the engine experiences low oil pressure during flight.

Annex 2: Oil and Fuel System Leakage Inspection

Annex 3: Cooling System Leakage Inspection

Annex 4: Engine Test Run Procedure

Annex 5: Engine Oil and Filter Replacement

Annex 7: FADEC Sensor Inspection

Annex 8: Gearbox Oil Filter Replacement

Annex 9: Gearbox Oil Level Check

Annex 10: FADEC Data Read-out and Analysis

Annex 13: Gearbox Oil and Filter Exchange

Annex 14: Coolant Exchange Procedure

Annex 17: FADEC Software Update Process