Technify Motors CD-135 - Fig. 6.26 Lock Wiring the Oil Filler Screw

Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
64
74
Revision no.:
Revision date:
7
20.07.2016
16. Secure the oil filler screw with a lock wire. See Fig. 6.55.
17. Do an Engine Test run according to Annex 4 of this Chapter.
18. Do a visual inspection and a check for leaks.
19. Check the gearbox oil level according to Annex 9 of this
Chapter
Fig. 6.55 Lock wiring the oil filler screw