Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
14
74
Revision no.:
Revision date:
7
20.07.2016
Annex 3 Inspecting the Cooling System for
Leakage
This is a visual inspection. The pipes, pipe joints and supply
connections are inspected for leakage and seepage points.
WARNING: No leakage and seepage points are permitted! No coolant loss
during operation is permitted! Any coolant loss must be followed
immediately by a technical inspection, as this can lead to engine
damage and failure!
To Next Page
Loading...