Let's Start
You can select input source by using source menu. Press [SOURCE] button to show the
menu as follows:
The current source item is highlighted. Through press [ ] button on the remote control
or [ CH+/CH- ] key on the LCD TV to select your required source, press [ ] button,
[VOL+/VOL-] key or [OK] button to confirm your choice .
SELECTING SOURCE OPERATION
After the unit has been suitably placed / fixed, on the table or on the wall, and all necessary
cables including the power have been connected,
Press the [STANDBY] button on the remote control to make the unit switch to power-on
mode - you will see the LED indicator turn green. Now you can enjoy the many features of
your new TV.
the next you should do is:
STANDBY
SWITCHING ON
InputSource
ATV
SCART 1
AV
VGA
HDMI 1
EXIT OK
DTV
S-VIDEO
HDMI 2
SCART 2
DVD
COMPONENT
INDICATOR
STANDBY
32" HD Ready LCD/DVD TV User Guide 17
To Next Page
Loading...
