English - 20 -
feature on again.
Highlight Sync Date And TimeSelect to
Language
You can change the system language.
Highlight LanguageSelect.
Choose your desired language from the list of
Select.
Metric Units
ON
Highlight Metric Units Select to switch
Sleep Timer
Highlight Sleep TimerSelect.
Select.
A countdown will start in the bottom corner of the
highlighting Select.
Note: The TV will switch o once the sleep time has elapsed,
no warning will be shown.
Device & Software
Highlight Device & SoftwareSelect.
About
network information and you will also be able to check
Highlight AboutSelect.
Your TV:
Storage:
Network:
network setting.
Check for Updates:
Select
USB Drive
drive. You will also be able to eject or format the drive.
connected.
Highlight USB Drive
on the right hand side of the screen.
Ejecting a USB Drive
Highlight USB DriveSelect.
Then highlight Eject USB DriveSelect. Now
remove your drive from the USB socket. The menu
will return back to the Device & Software root menu.
Formatting a USB Drive
Important: Formatting the USB drive will erase all
information on the USB drive. Once formatted this
stored on this drive.
Highlight Format to Internal Storage
Select.
OK.
Developer Options
Enable ADB connections over the network.
ADB Debugging: Press Select
Turn on to enable ADB connections over the network.
sources.
USB Debugging: Press Select
Turn on to enable ADB connections over USB for this
ADB
Debugging is set to OFF.
accessories unavailable.
Install unknown apps: If you have installed an
Legal & Compliance
Highlight Legal & ComplianceSelect.
Note: Your TV will need to be connected to the internet to
access Legal & Compliance information.
Sleep
Highlight Sleep Select
Standby or Select button.
To Next Page
Loading...
