PG 6
INSTALLATION CLEANING AND SERVICING
• An authorised person must install this appliance. (Certificate of Compliance to be retained).
• Before using the appliance, ensure that all packing materials are removed from the appliance.
• In order to avoid any potential hazard, the Installation Instructions must be followed.
• In order to avoid accidental tipping of the appliance (for example, by a child climbing onto the open oven
door), the anti tilt bracket and stability bolt must be installed propoerly and securely to the floor.
• The cooker must not be placed on a base or plinth.
• The appliance must not be installed behind a decorative door in order to avoid overheating.
• Where the appliance is installed next to cabinets, the cabinet material must be capable of withstanding 85º.
• Only authorised personnel should carry out servicing (Certificate of Compliance to be retained).
• WARNING - Always ensure the appliance is switched o before cleaning or any maintenance is carried out
such as changing of light globes.
• DO NOT use abravise type cleaner or caustic sodabased cleaners. Using warm soapy water after the
appliance has cooled somewhat, followed by a dry cloth is suitable.
• DO NOT use sharp metal scrapers to clean oven door as they can scratch the surface , which may result in
shattering of the glass.
• DO NOT use steam cleaners as a method to clean this appliance.
• Always clean the appliance immediately after any food spillage.
• To be serviced only by an authorized person.
• Appliances requiring connection to 220-240V and must be earthed.
• Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
• Gas models are NOT APPROVED for installation in marine craft, caravans or mobile homes.
To Next Page
Loading...
