12
Installing and Adjusting the Antenna
Extend the antenna and insert to Antenna socket of unit to ensure you receive the best reception possible in both
DAB and FM radio modes. It may be necessary to adjust the position of the radio and /or antenna to achieve the
best signal.
Turning the Unit On/O
Connect the plug at the end of power adapter cable to the DC IN socket of unit. Then insert the power adapter
into the mains socket. The unit will switch on.
Press POWER buon to switch radio to standby mode.
To switch the unit o completely, unplug the power adapter from the mains socket.
Volume Control
While a program is playing, turn VOLUME/INFO knob clockwise or anti-clockwise to adjust volume level.
Using Headphones
Insert headphones fied with a 3.5 mm diameter stereo plug to Headphone socket of unit. Headphones are not
supplied with this radio.
Turn down the volume before connecting headphones. Slowly raise the volume with the headphones on until you
reach your desired level.
Caution: long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume
when using headphones, especially for extended periods of time.
Automatically Seing the Clock
The clock can be set and updated automatically if is received DAB / FM signals in your location. In order for the
clock to synchronise to the current local time you must leave it on a DAB or FM station for a short period of time.
You can also choose how you would like to keep the clock up to date the DAB or FM radio signals. Press Menu
buon > Time > Auto update.
To Next Page
Loading...
Need help?
General