TechniSat DIGITRADIO 20 - Advanced Settings; Setting Backlight; Setting Language; Factory Reset Procedure

19
EN
FR
IT
NL
NW
DK
PL
CZ
SK
Set 12/24 hour format: ‘Set 24 hour’ or ‘Set 12 hour’
Set date format: ‘DD-MM-YYYY’ or ‘MM-DD-YYYY‘
3. Then seing time according to your personal preference.
7. 4 Seing Backlight
This feature enables you to adjust the brightness level of display.
1. Press MENU buon, and then turn SCROLL/SELECT knob to select ‘Backlight’, press SCROLL/SELECT
knob to confirm.
2. Turn SCROLL/SELECT knob to select ‘Power on‘ or ‚Standby‘, and then press SCROLL/SELECT knob to
confirm.
3. Turn SCROLL/SELECT knob to select backlight level, and then press SCROLL/SELECT knob to confirm the
seing.
Power on Level 1, Level 2, Level 3, Level 4 or Level 5
Standby Standby O, Level 1, Level 2, Level 3, Level 4 or Level 5
7.5 Seing Language
This feature enables you to change menu language. The default menu language is German.
1. Press MENU buon, and then turn SCROLL/SELECT knob to select ‘Language’, press SCROLL/SELECT
knob to confirm.
2. Turn SCROLL/SELECT knob to select your language, and then press SCROLL/SELECT knob to confirm.
7.6 Factory Reset
Doing a factory reset clears all user defined seing, replacing them with the original default values, so time/date,
DAB station list and preset stations are all lost.
1. Press MENU buon, and then turn SCROLL/SELECT knob to select ‘Factory Reset’, press SCROLL/SELECT
knob to confirm.