TechniSat DigitRadio 210

13
>Press Select (7).
>Select by pushing Tune up/down (6) the display, which will be shown in the bottom
line and press Select (7) toconrm.
Signal strength - Signal strength•
Program type - PTY•
Ensemble - Ensemble, to which the radio belongs•
Frequency - Frequency at which the radio station is transmitted•
Signal quality - signal quality at•
Codec and bitrate - bitrate and encoding of the data transmission•
Date - the current date•
Scrollingtext-texttransmittedbytheradiostation,suchasTitle/Artist•
FM mode
Automatic Tuning
>Press Tune up/down (6) for approx 2 secondstosearchautomaticallyforthenext
station and play.
Please refer to the setting in the point - search settings. Depending on the setting
and reception quality at the site either stations may be skipped or very poorly repro-
duced.Inthiscasetrytoalignthewiredantennadierentlyand/orchangethesearch
setting.
Manual Tuning
>Push Tune up/down (6) as long as the frequency of the desired station appears.
After a moment, the station will be played and the channel and program information
will appear in the display in case of transmission from the station.
Save favorites
> To save a channel or station at a favorite memory place, push and hold the corre-
sponding channel button (3) till the display shows, that the channel is stored.