TechniSat Digitradio 361 CD IR

28
4.4.3 Adjusting the volume
> Adjust the volume using the VOLUME -/+ buons (8, 26) on the remote control or by rotating the SELECT/
VOLUME knob (5) on the device. The set volume is shown on the display (4).
4.4.4 Switching to mute
> You can switch o the sound by pressing the MUTE buon (33) on the remote control.
This mode is indicated on the status bar by a corresponding symbol.
> The sound is switched back on by pressing the MUTE buon (33) again on the remote control.
4.4.5 Retrieving displays
> By repeatedly pressing the INFO buon (34) on the remote control or on the device (3) (in this case the
INFO buon must not be released for approx. 2 sec.) while a source is being played, you can display and
scroll through the following information:
DAB mode: FM mode:
DLS: continuous text with additional information, station RT radio text (if broadcast)
Genre PTY - Programme type
Ensemble/multiplex (group name) frequency, channel Frequency
Signal intensity Date
Signal error rate bit rate in kbps sound format
Date
Track, artist