TechniSat Digitradio 361 CD IR

54
> Press the On/Standby buon on the remote control (1) or on the device (1) to switch o the alarm.
The display (4) shows the alarm symbol again if the alarm repeat is set to Daily, Weekend or Working
days.
14.2.3 Switching o/deactivating the alarm
> Select the Alarm 1 or Alarm 2 memory, depending on which you wish to switch o/deactivate.
> Open Repeat and set it to O to deactivate the alarm.
The alarm settings are not accepted until selecting Save.
The alarm settings are retained so that they can be easily switched on/activated again at a later date.
14.2.4 Switching on/activating the alarm
> Select the alarm memory (Alarm 1 or Alarm 2) you wish to switch on/activate.
> Open Repeat and set this to Daily, Once, Weekend, or Working days to activate the alarm with the
seings already available.
If required, you can adjust the other settings as described in Section 14.2.1.
The alarm settings are not accepted until selecting Save.
15 System seings
15.1 Equaliser
To adjust the sound of the DIGITRADIO, you can use the equaliser with the available preset tunings Middle,
Classic, Rock, Pop and Jazz.
> Via MENU > Main menu > System seings > Equaliser you can retrieve the equaliser seings.