TechniSat Digitradio 361 CD IR

30
4.5 Visual display
4.6 Switching o the device
> You can use the On/Standby buon (1) on the device or on the remote control (1) to switch the device to
standby mode; the time appears. Aer approx. 10 seconds the display brightness dims.
5 Menu operation
The menu is divided into the menu corresponding to the currently selected source, the main menu, plus the
respective submenus featured therein. Navigation in the different menus can be performed using both the
remote control and the device.
> By pressing the MENU buon on the remote control (4) or by holding it down (approx. 2 seconds) on the
device (6), you can retrieve the menu and exit it again.
Current
source
Info area
Status bar
Time