TechniSat Digitradio 510 User Manual

23
Changing Station Order
You may want to display the stations in different order.
1. Press MENU button, turn SELECT/TUNE knob to select Station order, and then press
SELECT/TUNE knob to confirm.
2. Turn SELECT/TUNE knob to select 'Alphanumeric', 'Ensemble' or 'Valid', and then press
SELECT/TUNE knob to confirm your selecting option.
Alphanumeric
Display all stations in alphanumeric order.
Ensemble
List currently broadcasting active stations before inactive ones.
Valid
Remove inactive stations from the station list.
Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO button repeatedly to view
information through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal
Quality, Signal Strength, Bitrate, Codec, Channel and Date.
Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show
on the display.
The indicator on the signal bar shows the minimum acceptable signal level.
# Note: Stations with signal strength below the minimum signal level may not provide a steady stream of
audio.

TechniSat Digitradio 510 Specifications

General

Brand	TechniSat
Model	Digitradio 510
Category	Radio
Language	English